Interior and exterior paint tips
Inspect your interior and exterior paint finish annually. Maintenance extends the life of interior and exterior paint, saving you time and money.
Inspect your interior and exterior paint finish annually. Maintenance extends the life of interior and exterior paint, saving you time and money.
Exterior paint can support mildew growth, particularly after the paint has weathered for more than a couple of years. Mildew will most likely occur on northern exposure and in shaded and damp areas. When you discover mold or mildew, call your painting contractor, or do as follows:
Airborne dirt can accumulate on paint and discolor it. Soil can then become a fertile food source for mildew. Chalky pigment can be released from the paint film as it weathers—fading colors and causing a streaky rundown. Both soil and chalk can be removed by scrubbing or power washing.
It is essential to check or this exterior paint condition and catch failures early. You will minimize subsequent, more significant paint failures. Examine the paint closely for cracking and peeling, and repair immediately.
May your paint job remain great looking for many years to come!
Here are a few interior paint maintenance tips that can help extend the life of your new interior paint job and ultimately save you time and money:
Interior paint typically gets dirty as follows: handprints around switches and knobs, splashes in kitchens and bathrooms, marks on hallways and corridors, soot accumulating above electric lamps and other heat sources. While changing color is always a good reason for repainting, covering over the dirty paint is often avoided or postponed. Removing dirt before it accumulates not only improves appearance, it reduces the chances of it getting permanently embedded in the paint film.
Check for dirt periodically. Assume it will be present in and near cooking areas and at all locations at hand height. Always initially clean the surface with a mild detergent with a sponge or a soft cloth/ Resort to harsher cleaners only when necessary, recognizing that alkaline cleaners can dull the sheen or gloss of oil-based paint. Abrasive cleaners will burnish nearly any paint and dull the luster of satin, semi-gloss, and gloss products. Washed surfaces should be rinsed thoroughly because residual cleaner can interfere with the paint adhesion applied later.
Watch for mildew growth on painted surfaces that tend to be moist; this includes laundry and basement areas, bathrooms, and kitchens. Mildew should be treated and removed, never simply painted over.
Apply a water and household bleach mixture to the mildewed area using a rag or sponge. Wear eye and skin protection and a respirator. With colored paints, do a test area first. Protect the floor and nearby articles. Allow the mixture to remain on for twenty minutes; add more as it dries. Rinse off the area thoroughly.
Sometimes painted surfaces will adhere to each other, like a door and jamb. Most likely, the painted surfaces are put back into service before thoroughly drying the paint. Dark color paints tend to block more than light colors or white paints. Glossier paints block more than flat paints. Warm and damp conditions increase the tendency to block, and of course, applying pressure increases blocking.
Always allow ample time for the paint to dry before putting the painted object back into service. If blocking is observed, rub talcum powder or candle wax onto both surfaces to alleviate sticking. The plasticizer in gaskets used in windows and doors can soften latex paint and cause sticking. This is problematic with new gaskets and with dark tinted paints. Steps to minimize this include waiting several weeks to paint a new installation, using a light color or white paint, and applying talcum powder or candle wax to the gasket and paint.